Kitchen& Bath Cabinetry

Counter-top Granite Quartz

Kitchen Remodeling

Contractor's Specials

Sand & Refinish Hardwood

Wholesale Cabinetry

GE Money Special Financing

Kitchen Remodeling FAQ

Barh Remodeing Costs

 

Contact Kitchen,Bath&FloorsUSA

 
 
 
 
 
 

18224 Flower Hill Way

Gaithersburg,MD 20879

contact@kitchenbathandfloorsusa.com

        301-760-7024

            In  Virginia

          703-273-7335

User Rating:  / 0
PoorBest 

Print

 

Question- We have ten year old hardwood floors that was stained very dark. I think they call it Saddle. Can they be brought back to new with a color that's not too dark? It also has these big bevels in them. How do they sand those?

Reply- You'll have to have someone come in and remove all of the darker stain. That will require a drum sander starting with a heavy sand paper grit. For the bevels and depending on how deep they are they will have to be scraped completely by hand.

Question- I hope you can help! We had some water damage in one area of the house and the installers came in and replaced it while we were at work. When I came home I was horrified because it did not match. It doesn't even look like the same wood. If it makes any difference it was Cherry.

Reply- If it's a natural Cherry there's no wonder why it didn't match. Cherry changes color quite a bit over the years. Even over a period of a few weeks, it can darken. As for trying to fix someone may be able to tint the new area to a color that closely resembles the exiting older area, but it will never be a perfect match. If you want the job done right a complete redo would be the best solution.

Question- How hard is it to change a white colored floor without a stain? This old white floor is driving me nuts and is in shambles.

Reply- I'm assuming you want to bring the older white floor to it's natural color? Well, one thing is certain, changing from white to natural is easier than going from a dark color to a light color. Depending on what types of cleaners were used over the years, the floor will need to be completely sanded to bare wood. Once that step is completed any choice of finish can be used.

Question- I've been learning so much from your website. We are installing hardwood floors in our kitchen, dining room, entry and hallway. It's a very open area. Our kitchen cabinets and woodwork are a medium golden oak. The big decision at this point is if we should match the cabinets, go lighter with a natural color, or go with a darker stain. Any suggestion would be greatly appreciated! Also, we're leaning toward Bruce prefinished hardwood with a beveled edge from Lowes. Any opinions about beveled edges would also be appreciated.

 Reply- Color is more of a personal taste issue than anything, though I would vote for a natural hardwood floor. True beveled edge floors can be a cleaning nightmare and there are better places to shop for hardwood floors than the big boxes that have limited selections.

 Question- I am looking to refinish my hardwood floor in the living room and dining room of my newly purchased house. It appears to be the original and has never been repolished or refinished (about 15yrs old). How much does it generally cost to refinish, $/sq ft?. Size is about 13x15 and 13x11. I live in South Jersey by the way. Thanks in advance.

Reply- That's hard to say as it depends on each and every floor refinisher. There are some guys that use absolute dust containment for those that suffer with allergies that are caused by airborne dust during the refinishing procedure. Expect these guys to be far above the others. You can get some more ideas by visiting our page on refinishing older hardwood floors at the link below.

 Question- We have some three year old BR111 engineered Timborana that we'd like to get refinished, but the floor store said it can't be done when we bought it. Is there another Timborana we can buy that will last longer? The store has since closed down like many others in the area. Any suggestions? Is there a stain we can apply on another engineered floor that will look like Timborana?

Reply- Try Brazilian Direct for another Timborana. They outsource quite a bit of solid and engineered exotic hardwoods. Most of their products are prefinished but they also offer unfinished hardwood. If they can't find it, it isn't manufactured.

 Other Mailbag Pages:

• Pergo Hardwood Floors
• Changing Hardwood Floor Stain
• Maple Hardwood. Gaps, Cracks
• Bamboo Flooring FAQ
• Hardwood Floors Covered By Carpet
• Floating Floor FAQ

 Related Pages:

• Hardwood Floor Refinishing
• Exotic Wood Floors
• Unfinished Hardwood Flooring - Hardwood sanded and finished

 

Last Updated on Thursday, 16 February 2012 06:42

Current Specials

  • Complete Kitchen Remodeling 10'x 12' Kitchen

 

  • Up to 15 Maple Cabintes
  •  
  • Free Granite Countertop
  •  
  • FreeSolidHardwoodFlooring
  •  
  • Free Undermount Stainless Sink $8495.00

 

Cabinets Blowout Sales

 

DECORA'     Cabinetry 35% off

 

SCHROCK    Cabinetry 35% off

 

KitchenCraft Cabinetry 35% off


 


Hardwood Flooring Blowout

 

Bruce Hardwood  Pre-Finished3/4"x21/4" $4.89 SqFt

 

Installed

 

Bruce Laminate Floor $3.99

 

SqFt Installed


 

Sand & Refinish As Low As $2.75 SqFt

 

 

 

All RightsReserved.Kitchen,Bath&FloorsUSA,Inc,Maryland 301-760-7024 , Virginia 703-273-7335