Hardwood Medallions & Borders


Hardwood floor medallions and borders graced only the homes of the elite and industrial barons years ago when they were handcrafted on site without the use of power tools. Since, times have changed bringing down the costs along with it. These types of additions can add substantially to the resale value of a home, not to mention the personal satisfaction of having something different.

Specifications

Most common medallions and borders are manufactured similar to engineered hardwood floors when considering a 3/4" thickness. The top layer or veneer is approximately 5/16" in thickness. The underlying makeup is generally high grade Baltic birch plywood. Both veneer and ply is glued and attached under intense pressure. Design pieces themselves are made up from a few individual pieces into hundreds (mosaic) depending on which type of design you're seeking. Custom designs are always an option.

Where Are Medallions & Borders Installed?

Medallions usually become the main focal point when entering a home. However, leave it to anyone's imagination, medallions can be used virtually anywhere. Borders on the other hand, usually define a room or area. Some border designs highlight areas or warp around the perimeter of hardwood flooring throughout the home.

How & When Are Designs Installed Into Floors?

Most medallion manufacturers ship templates or guides used to help install a pattern. Exceptions include some designs over 48" in diameter. For others a swing arm jig is used. Borders on the other hand are best installed working off the design. All methods are discussed on additional pages.

Designs are typically installed when new hardwood floors are being laid. For geometric or straight cut types, the medallion is often set first then the installer works off the design in different directions. On the other hand, circular designs or radiuses are cut out and installed after the floor has been laid, while keeping a keen eye on where fasteners have been used to install the hardwood.

This kind of work requires planning and patience. When this article was originally written (2003) we considered this work an unfriendly do it yourself project. However, after several wrote to us showing off their work we've changed our opinion, providing you are familiar with power tools and especially the router.

Prefinished or Unfinished? Are They Stained?

Many medallions and borders today have the option of arriving prefinished. However, the majority come unfinished only. All 3/4" medallions will require verylight sanding. All finer quality medallions and borders are natural hardwoods and not stained.


If you're seeking colors out of the realm in hardwood floor species in the likes of green, red, and blue, impregnated hardwoods can be utilized, but not all manufacturers offer such; exceptions being custom orders.

Can I Buy Thinner Medallions For My Engineered Floor?

Yes, all manufacturers can produce medallions or borders down to approximately 3/8" thickness, but they will generally be unfinished only. Any experienced floor finisher can finish the project with a sheen level that matches your prefinished floor.

Border Lengths

Depending on the manufacturer, most prefabricated border designs are produced in three to four foot lengths.

Related Pages:

• Hardwood Flooring Designs & Ideas
• Hardwood Floor Medallions
• Custom Hardwood Medallions
• Mixed Media. Hardwood & Tile or Stone
• Hardwood Floor Borders - One strip type. How they're installed
• Parquet Wood Flooring
• How Medallions Are Made
• Installing Medallions On Existing Hardwood Floors
• Installing Medallions On Concrete
• Stone Medallions

 

Last Updated on Sunday, 22 January 2012 14:51