User Rating:  / 4
PoorBest 
Print

 

Dust control should be addressed when it comes to hardwood floor installations or when floors are being refinished. Before any work starts one should be aware what dust fromTaping Off Doorways keep dust out sawing and finishing machines can do to your indoor air quality. Even more important in cases when some family members may suffer from allergies.

During the installation, professional installers will do the cutting of hardwood away from the home's interior. Places are typically garages or outdoors with weather permitting. Patios and or lanais are a popular spot. In cases where this may not be possible, an alternative is tenting the work areas with plastic sheathing to be used as a dust barrier. These items can be found in practically any hardwood store, Home Depot, or Lowes.

Sealing Kitchen Cabinets & Under Doors

Not only is it important to keep larger open areas protected with plastic sheathing, but dust can find it's way inside kitchen cabinets, through doors and their casings. Using 3M blue painters tape or the purplish stuff is an ideal temporary dust mask. Scrap carpet padding can be used under the doors. Of importance would be removing the tape in time wise fashion, or not allowing it to be exposed to direct sunlight most of the day. Prolonged exposure to heat and or sun can allow the tape's adhesive to bake into the trim work. The consensus calls for purple tape as a safer alternative. Fresh paint can also have a tendency to peel off if not cured properly.

Other areas of protection should include HVAC intake units, should a lot of dust be raised during this period. Failure to protect this area could force dust into your heating or cooling system that could be noticeable for months and years to come, unless a thorough cleaning is done. Again, taping off with sheathing is the best solution. Image seen below, above baseboard.

In some cases grinding or sanding of the subfloor may be required to insure a flat Grinding Concrete With Dust Controlsubfloor; critical for any successful installation. Tools with vacuum attachments (shown left) will cut down on 95% of the dust that would otherwise become airborne.

Dirty Carpeting Being Removed

Other activities that will raise dust prior to the installation will be removal of carpet and padding. These materials are a dirt magnet. After years and years of vacuuming you will be surprised how much dirt, grit, and sand gets through carpet and padding.

If you're fond of gadgets and other cool stuff there is a company that deals exclusively with dust control called Zip Wall.

The same procedures for maintaining dust control if floor sanders are being used should also be taken into account. It's also a good idea to insert fans in window openings, drawing the potential airborne dust out of the home.