Installing Glue Down Hardwood Floors On Concrete
Gluing of hardwood floors represents a sizeable part of the hardwood flooring business with most of it installed on concrete in homes that are generally on grade (no basement).
Not For The Timid DIY
These types of installations are more prone to failure over all others. Some of the more common reasons include; improper or no floor preparation, wrong adhesives or incorrect amounts applied resulting in de-bonding of the material from the subfloor. This is why any glue down installation should be performed by someone that has the experience and know how. Adding to the difficulty is the mess involved.
How Are They Installed?
Gluedowns are installed by trowel spreading of adhesive on the subfloor in a pre determined area (shown above). Usually professionals will measure out three feet or enough for twelve rows to cover, using a three inch wide board as an example. Each and every individual board is placed one at a time into the adhesive until the glued area is covered. Once completed, another area is marked and laid.
Not All Types Of Hardwood Should Be Glued
Contrary to what you may hear, not all products can be glued easily. Put another way, gluing solid 3/4" hardwood has always been risky business, but some premium urethane glue manufacturers will warrant their use. The difficulty encountered with solid hardwood is the lack of flexibility compared to more common products that are glued; engineered flooring.
Common types used for gluing down are engineered hardwoods. Thickness vary from 1/4 inch up to 3/4" depending on the manufacturer. During manufacturing the bottom sides of many products are milled with relief cuts. This insures the flooring can bend to minor irregularities in the contour of the subfloor it is being installed, while increasing the bonding contact with adhesive at the same time. This is definitely not an excuse to skip floor preparation; stressed heavily on this site.
Pros and Cons Of Gluing
Most consumers prefer the solid feeling of hardwood floors underfoot. Floating floors for the most part do not offer this benefit unless a premium underlayment is used and a very flat subfloor is maintained prior to installation. After the addition some still complain of the hollow effect floating floors exhibit. A properly glued hardwood floor will feel and sound very much like a traditional solid floor.
Adhesives used for these types of installations do not come by cheaply. More preferred types recommended by many manufacturers can cost upwards of eighty cents a square foot depending on where it is purchased. With any glue down installation, do not take the suggestion of ill informed persons that any old glue will work while saving you bunches in the same breath. Skimping on costs in this department may very well lead you to our message board forum titled, "Yikes I Have Problems."
How Long Does It Take To Install? Are Adhesives Toxic?
Assuming you have a 400 square foot, square room with furniture moved and everything is ready to go, one experienced installer can complete a 3 inch wide glue down installation in 10 -12 hours. Adhesives used today are predominantly three types. Water based, urethane based, or acrylic, with the majority of manufacturers leaning towards the urethane.
Older more toxic adhesives are long gone, with newer more environmentally friendly varieties. If you are chemically sensitive it may be wise to vacate the premises when work is being done. With glue downs, curing time is typically one day or an overnight period before furniture can be moved back into place.
Go To: Floor Preparation Before The Installation
Other Pages In This Series:
• Floor Preparation. Leveling Concrete
• Layout - Changing Direction Of Wood Floors
• Starting The Installation
• Tips. It's Nice To Stay Clean
• Types Of Hardwood Glue
• Engineered Hardwood Floors
• DIY. Easiest or Hardest Floors To Install?
• Installing Hardwood Floors On Diagonal
All RightsReserved.Kitchen,Bath&Floors, Maryland 301-760-7024 , Virginia 703-273-7335